The Tungsten Carbide Nozzle Offers a Balance Between Wear Resistance and High Performance

Share this Article

Your nozzle is the last and final step in your extrusion system, and maybe the most important part of your 3D printer. Plastic flows through the small orifice, thanks to the pressure generated by the extruder pinch system. This high flow can reach a pressure as high as 250 times the atmospheric pressure (25 MPa).

With plain plastic, any common metal can easily hold up against the flow. Unfortunately, once we start using plastic filaments with hard reinforcement fibers such as carbon and glass, things start to get more complicated; these reinforcement materials will scratch the inner wall of your nozzle orifice as they pass due to the flow and pressure. Both glass and carbon are known to be very hard, a lot harder than any metals, resulting in what is known as abrasion inside your nozzle.

The more you print; the worse it gets…

That’s why Montreal Startup Dyze Design, a dedicated and passionate team working on the development of high performance 3D printer parts, created the Tungsten Carbide Nozzle: a state of the art nozzle that offers good durability and performance for almost any 3D printer, such as Ultimaker, Raise3D, Prusa, Makerbot, Robo, LulzBot, Flashforge and many more.

“Tungsten carbide, not to be confounded with tungsten alloy, which is metal, is the ceramic of choice when it comes to wear and abrasion resistance. Cutting tools for steel and tool steel are made from tungsten carbide. It is also used extensively in the mining industry as a button insert for crushing rocks,” says Philippe Carrier, Dyze Design’s Chief Research Officer. “Moreover, the high thermal performance of the tungsten carbide keeps the nozzle tip hot, thus allowing faster printing speed without sacrificing the quality.”

In fact, the thermal conductivity ensures that heat is able to travel up to the tip of your nozzle, keeping your molten plastic at the right temperature. Having a bad heat conductor may lead to colder extrusion, thus poor layer bonding and greater flow fluctuation. For these reasons, any kinds of steels and ruby nozzles will lead to lower extrusion flow.

Why should I use the tungsten carbide nozzle?

Comparing a reference brass nozzle from Ultimaker, the tungsten carbide nozzle is much easier to extrude. In fact, the output flow can be increased by around 80% while having the same results.

The tungsten carbide nozzle, now on Kickstarter

Dyze Design just launched a Kickstarter campaign for this nozzle. The Kickstarter campaign, which ends on April 4, set an initial funding goal of $15,000 CAD. The campaign will help them ensuring that they can measure performances in extrusion, flow and oozing, make improvements on the different molds, manufacture more nozzle sizes and do high-temperature tests.

Dyze Design wanted to create a high performance, yet affordable product. That’s why the pricing is very reasonable. Rewards start at $48 CAD for Super Early Bird, which includes one nozzle available in 0.4mm, 0.6mm, 0.9mm or 1.2mm. For $115 CAD, you can get a double pack or the triple pack for $172. There are also a lot more rewards, such as the super early bird 4 pack, 6 pack, 10 pack, 25 pack or even 50 pack.

Shipping is expected to begin in September 2018.

You can find more information on the Kickstarter page here.

Discuss this and other 3D printing topics at 3DPrintBoard.com or share your thoughts below.

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.

Share this Article

MMX 2023: America Makes Evolves with the 3D Printing Industry

Agile Space and 6K Additive Partner to Advance Space Tech with Superalloy 3D Printing

3D Design

3D Printed Art

3D Printed Food

3D Printed Guns

Two ambitious undergraduate students from the University of Colorado (CU) Boulder Aerospace Engineering Sciences program, Zachary Lesan and Patrick Watson teamed up with industry behemoths, ranging from Velo3D to CFturbo...

In today’s 3D Printing News Briefs, we’ll tell you about the awards a 3D printing company won, a partnership for tungsten powder, 3D printed interior car design, and 3D printed...

We’re starting with maritime 3D printing news in today’s 3D Printing News Briefs, and then moving on to construction. There are several collaborations and partnerships to report on in regards...

The recent successful completion of a 12-test certification campaign marks a significant milestone in Aerojet Rocketdyne (NYSE: AJRD) ‘s RS-25 engine production restart program. In partnership with NASA, this rigorous...

Upload your 3D Models and get them printed quickly and efficiently.

Site Sponsor

Events

Additive Manufacturing Strategies

Networking & Intelligence Summit, February 6-8, 2024

Jobs

3D Printing jobs around the world.

Subscribe to Our Email Newsletter

Stay up-to-date on all the latest news from the 3D printing industry and receive information and offers from third party vendors.

3D Printing Guides